| After-sales Service: | Spare Parts Avaliable |
|---|---|
| Warranty: | 1 Year |
| Certification: | CE, RoHS, ISO 9001:2000, ISO 9001:2008 |
|
Still deciding? Get samples of US$ 120/Piece
Request Sample
|
Suppliers with verified business licenses
The small hand-push lawn mower consists of a cutter head, an engine, a walking wheel, a walking mechanism, a blade, a handrail and a control part. It is composed of parallel four-bar lifting device, frame, left and right single-wing weeding device, whole machine deviation adjusting device, comb tooth rotating bevel gear speed-increasing transmission mechanism and comb tooth imitation depth adjusting device; the efficiency is more than 10 times that of manual weeding , does not hurt the seedlings, and the weeding rate is high.
1. Clean grass, trim neatly, adjust height, front and rear, left and right, easy to operate.
2. It can be trimmed (weeding) in lawns, orchards, manors, gardens, and mountains.
3. There is no need to bend over and hunch back when working, and it can be easily operated and used by men, women and children. Change the corresponding knives, install the upper and lower pallets and safety shields, and can also harvest shrubs, pastures, reeds and trim the lawn of flower beds.
| Model | RM-1 | RM-2 |
| Contect | Basic Parameters | Basic Parameters |
| Operating width | ≥80cm | ≥80cm |
| Operating speed | 2.0-4.0km/h | 2.0-4.0km/h |
| Cutting height | ≥5cm | ≥5cm |
| Operational efficiency | ≥0.15hm2/h | ≥0.15hm2/h |
| Blade speed | 1800 - 2400rpm | 1800 - 2400rpm |
| Dimensions | 810mmx930mmx780mm | 540mmx930mmx810mm |
| Structural weight | 27kg | 30kg |
It is used for flat grassland in agricultural/pastoral areas and grassland in mountainous and hilly areas, mainly for lawn trimming, forage harvesting, pastoral management, shrub trimming, etc. The engine is a four-stroke air-cooled gasoline engine, which is started by a rebound starter. The transmission is smooth and there is no energy loss. Environmentally friendly design, in line with Euro II emission standards.
The cutter is moved by the roller mounted on the eccentric crank directly driving the chute on the blade. The eccentric mechanism is connected with the power output belt at the front end of the chassis transmission box through a primary belt drive. The clutch adopts a combined sub-tooth clutch. The reciprocating cutter clutch control, throttle switch control, and emergency flameout switch control are all located on the operating armrest, and the handle can be adjusted up and down in the vertical direction. The cutting blade is made of special chrome steel, with good wear resistance, and the blade clearance can pass Cutter shim adjustment. The guide of the cutter is accurate and stable, and the tires use herringbone rubber wheels in order to increase the running adhesion. The transmission mechanism is equipped with a protective cover, which is safe to use. It has the advantages of stable operation, low power consumption, good cutting quality and no blockage of the knife.
A: Yes, we will 100% test before delivery.
){kind=link}